High productivity drilling & fine boring are easy with Wohlhaupter India’s latest products GEN 3XT Pro and Variobore. Wohlhaupter India has launched GEN 3XT Pro drill from Allied Machine & Engineering, USA and Variobore boring head from Wohlhaupter GmbH, Germany in the Indian market. Allied Machine & Engineering and Wohlhaupter GmbH pioneers in field of drilling and boring are carrying out their Indian operations thru their subsidiary Wohlhaupter India. Allied Machine & Engineering, AMEC has indexable drills from 9.5mm to 142mm with deep L/ D ratios and Wohlhaupter has boring tools from 0.4mm to 3255mm diameter.
New GEN3SYS® XT Pro line of high penetration drilling products, which features inserts and holders designed for three new geometries and introduces several new coatings. Combining specific geometries and coatings to create the optimal solution for different machining materials, this next level of the GEN3SYS® high penetration drilling product line delivers top results.
GEN3SYS XT Pro is available for steels (ISO material class P), cast irons (material class K), and non-ferrous materials (material class N). The drill inserts come in diameters ranging from 11 millimeters to 35 millimeters. Those in steel and cast iron will also have new AM400 coatings, while inserts for non-ferrous materials are coated with titanium nitride (TiN). Holders for the GEN3SYS XT Pro line are offered in numerous depth-to-diameter ratios, including 3xD, 5xD, 7xD, and the brand new 10xD. The new holder features an enhanced flute design that improves chip evacuation and an updated coolant configuration that increases coolant flow and directs coolant to the cutting zone. Available in imperial and metric shanks, the holders come in cylindrical and flanged with a flat.
Variobore is a versatile and cost-effective tool that features a universal digital readout module. The VarioBore Precision Boring Head & System improves productivity through ease and accuracy of adjustment and virtually eliminates scrap because of its exact adjustments. A single module can be used on a wide variety of tools fitted with docking ports. With a range of 0.4 to 152 millimeters, the boring head offers an accuracy of 0.002mm on diameter, and speeds of up to 30,000 revolutions per minute. A single Universal Digital Readout Module can be used to set any number of tools that have docking ports. The system uses selected Wohlhaupter 019, MiniDigi, PrimeBore, and DigiBore tooling. With an easy to read and use display that provides easy micron accurate settings, the module features an accuracy of 0.002mm on diameter with μ accurate ± setting. The battery allows up to 5,000 settings and is switched off after 30 seconds. The detachable module remembers the last setting, even when it is detached. The module is coolant-sealed up to IP 65.
Wohlhaupter India has the facility to repair its boring heads.
For more information,
Your email address will not be published. Required fields are marked *
Copyright © 2015. Divya Media Publications Pvt. Ltd. All rights reserved