MECO Clamp – On TRMS Power Meter

MECO Clamp-On TRMS Power Meter Model 3510PHW-AUTO is State of the Art Versatile Instrument using Micro Controller technology and Automatic Computation of 1ɸ and 3ɸ (3ɸ3W/3ɸ4W) Parameters. 4 Digit 9999 Counts LCD, Dual Display with Jaw opening for Cable Dia 43mm (max) & Bus Bar 16mm x 65mm are key features. Auto ranging, Data Hold, Auto Power off, Diode, Capacitance, Temperature measurement are additional features.

Meter is ideal for Inspector / Engineer to carry out Vigilance check, testing, surveys and periodic visits at Industrial and Consumer end. The Measurements can be done without disconnecting the loads and in a very short interval of time. Procedure to measurement is clamping on busbar, taking voltage from the same phase, it will display parameter including Horse Power (800HP), Power Factor, Frequency, Inrush Current, Phase Angle, TRMS Current (1000A AC), Voltage (600V AC/DC), TRUE Power (600KW), Apparent Power (600KVA), Reactive Power (600KVAR) and Resistance upto 100MΩ.

Model 3510PHW-AUTO useful for Electrical Audit of HVAC and other industry to check Current drawn in Motors, Compressors, Test Run / Start Capacitors, check 3ɸ Phase Sequence, Check for Energized Circuits and Balance Loads. Also Determine Peak Power demand periods, use MAX/MIN/REC in Temperature mode to Assess Efficiency, Evaluate Electrical Contacts, Check Motor Run / Start Capacitor and many more. Accessories are Carrying Case, Battery Installed, Test Leads Pair and Instruction Manual. K Type Thermocouple (Upto 260°C) is optional.

Meco Instruments Pvt. Ltd.
www.mecoinst.com