USP
At FIBRO, safety has always been a top priority. A safer working environment
FIBRO Safety Features
Designed for controlled gas venting through piston rods with integral safety stops and specially designed guides.
Over-Pressure Protection
FIBRO Over-Pressure Protection System is designed to vent excessive gas pressure in a controlled manner.
No risk of bursting parts in the event of overpressure
Over-Stroke Protection
FIBRO has a developed unique System. The cylinder wall is designed to deform in a predefined way, venting the internal gas pressure in a controlled manner.
No risk of parts flying around in the event of an overstroke
Return Stroke Protection
A particularly dangerous situation can arise with conventional gas springs if tool components become jammed and the pressure on the compressed piston rod is then abruptly released: in this case, the piston rod is then fired out of the cylinder like a missile.
No risk of a piston rod firing out if the return stroke is too fast
FIBRO gas springs are different:
special guides and a patented safety stop in the piston rods ensure your safety. If the speed is too high during the return stroke, the collar on the piston rod will automatically break. The integrated safety stop then destroys the seal, which allows the gas to escape into the atmosphere and the gas spring to become depressurised.
PED Approval for 2 million Strokes
FIBRO Gas Springs are designed, produced and tested according to PED 97/23/EC for 2’000’000 full cycles* at the highest allowed charging pressure, the highest allowed running temperature, and for all specified mounting methods.
Guaranteed safety and reliability for the entire service life of the spring
For more information,
Website : www.fibro.com
